The Greatest Trans Am Ever Built? 7 foot wide, 700hp, 10,000rpm Track Ripper


TheHoonigans
TheHoonigans

You’ve got an hour with this Trans Am, where do you take it and what do you do?

Vor 15 Tage
Crown royal
Crown royal

I won a small lotto,, how much to redo my 67 Camaro dragcar?

Vor 21 Stunde
Jack Thompson
Jack Thompson

My shop, fix the camber and shit that isn’t symmetrical

Vor 23 Stunden
MrMuziekman
MrMuziekman

an hour? hmm id prob take it to a drift track if i could instantly start and just rip around in it that intire hour xd

Vor Tag
The law was made For peasants and minorities
The law was made For peasants and minorities

I'll definitely take it to Japan and go kango racing

Vor 4 Tage
Cameron Spencer
Cameron Spencer

Club day at Bathurst.

Vor 5 Tage
Jason Seed
Jason Seed

Wow!! incredible!! very talented guy

Vor 2 Stunden
Widdy1 One
Widdy1 One

I wanna see it go up against cleetus mc farlands ruby,,auction corvette.

Vor 3 Stunden
Jack Thompson
Jack Thompson

When he made the comment about the vacuum, I lost any hope in proper engineering or building knowledge/experience. Sorry.

Vor 6 Stunden
Mu2driver
Mu2driver

Seriously a lot of thought and hard work went into this car, the kid got skillz👍🏽

Vor 16 Stunden
Mick Grimes
Mick Grimes

if SEMA didn't/doesn't get him a job, this video will. i havn't looked, but im pretty confident there is a build thread for this somewhere...

Vor 19 Stunden
Heinrich Williams
Heinrich Williams

The start when all of the car alarms go off 😂

Vor 20 Stunden
John Skinner
John Skinner

Stock is boring, this is bitchen!

Vor 22 Stunden
James Allen
James Allen

no mention of a chassis jig in the car port either

Vor Tag
Jonathan Orellana
Jonathan Orellana

This entire car is essentially DIY...wow. Amazing work man.

Vor Tag
Jonas Hällsten
Jonas Hällsten

This car is got damn amazing! the builder is higly skilled!

Vor Tag
Bob K.
Bob K.

I want to see this guy do a 68-72 Vette.

Vor Tag
William Knight
William Knight

excellent work

Vor Tag
Bob Marley
Bob Marley

Is that a Baldwin, i cant stand that Baldwin, dork

Vor Tag
james huffman
james huffman

I have this same car. The only thing I don't like is how he run the headers. There is no way I would run them like that. My car is set up for drag racing and my engine sets way back like that. But I did not run my headers like that. My car is only 3 inches off the ground with a big block 632ci chevy engine in it with 1100hp. This car he has is nice looking and I like it. Just not liking the headers.

Vor Tag
Badd Mouth
Badd Mouth

Damn this is TITS!!!!! Under that car is incredible. Absolutely love the way this guy's mind works when it comes to the bends and placement of his caging

Vor 2 Tage
79medic
79medic

Ugh ,,, you have totally ruined some great American muscle ...

Vor 2 Tage
Rajin Cajun
Rajin Cajun

What Trans/Am?

Vor 2 Tage
Michael Escamilla
Michael Escamilla

I am not even a car guy and I had to watch this whole vid. My jaw was on the floor the entire time. This young man is brilliant. I hope he finds much success.

Vor 2 Tage
Trackappeal
Trackappeal

Mad props to this dude. The car is magnificent. I designed my dream Superbike this yr. Theres nothing better than having your dream machine come to life. This thing is so hard, next level.

Vor 3 Tage
J A
J A

You’d think it would have a lot more hp than 700hp

Vor 3 Tage
Skittle Fabz
Skittle Fabz

This is a damn transformer! 🤩

Vor 3 Tage
DJBATMANGOLD
DJBATMANGOLD

That thing is so clean... I don't believe that he built it off the side of his parent's house. 😂

Vor 3 Tage
paul reynolds
paul reynolds

That guys got some skills would love to know what he did for a job.

Vor 3 Tage
kenp3L
kenp3L

It seems like an interesting subject, but I had to hit pause early on due to the aggressive videography.

Vor 3 Tage
Reboot toys Ellis 1979
Reboot toys Ellis 1979

I hope you got a lot of video of that car with the engine running. If you did can you upload a video of nothing but the engine sound. I want to follow sleep. Every night without in my ear

Vor 3 Tage
Robert B
Robert B

but.... what does it do on the track?

Vor 3 Tage
Gerard Flynn
Gerard Flynn

What a great build. And such a humble man.

Vor 3 Tage
RammYou2
RammYou2

however this got built - it's stunning. the subject matter is legend here in Trans AM USA. spot on for the car to build. Since it was just a skin - the actual chassis looks like something of a cross between Trans AM and maybe Nascar with a little SCCA and some other cool stuff that this builder loved. That exhaust system up front like that is totally radical in build philosophy - nothing like I've ever seen, but it does make sense. the heat stays off the lines running down low and the water cooled engine won't care. it might get a bit warm in the cockpit but an ac unit will fix that right. i think a light weight belly pan to encapsulate the engine bay might be in order here. something well ventilated to keep things cool but protect the lines. probably al6061-t6 sheet would do the job best. polish to a sheen and cut some pretty louvers in it. zeus it into the frame, what there is of it. think your engineering is incredible. you sound smart and from your work you are. it's rare to prove this kind of skill. the pic of the white TA kept showing up on the recommended and I finally bit as I've owned several TAs. glad I did. Kudos.

Vor 4 Tage
andujo211
andujo211

Build at parents house ✓

Vor 4 Tage
Christian Thério
Christian Thério

Odd question but did you had alot of stuff or peoples getting in the way of this built...know what i mean

Vor 4 Tage
rick roby
rick roby

I stoped at ls

Vor 4 Tage
Maceo Moore
Maceo Moore

🤯🤯🤯🤯🤯

Vor 4 Tage
Albert McDonald
Albert McDonald

Awesome TA! wow great detail! Motorman in da Sip

Vor 4 Tage
Focus ЯSИ
Focus ЯSИ

My ears are bleeding wtf dudes

Vor 5 Tage
CCP Fabrication
CCP Fabrication

Love the look.Very well done. Great job

Vor 5 Tage
Seb Smith
Seb Smith

he is exceptionally skilled - unbelievable build! and props to working outside, I also have to do this on my cars

Vor 5 Tage
Lance Lawson
Lance Lawson

It may be fast but it looks ungainly. The wheel flares are too abrupt. They need to begin another 6 inches forward and aft from where they begin and end now. All that negative camber is going to wear tires in a big hurry and unless it's a true race car not needed.

Vor 5 Tage
Corey Mitchell 2020
Corey Mitchell 2020

Jesus

Vor 5 Tage
Chris Phelps
Chris Phelps

Trolls. Dude it sounds and looks mean

Vor 5 Tage
Alan Watson
Alan Watson

Beautiful car and a very creative and smart young man. Nice to see a young man with his head screwed on straight with a bright future in this business if he wants it.

Vor 5 Tage
Cristian Zamora
Cristian Zamora

Damn shame to see a beautiful car like this fucked up

Vor 5 Tage
Joseph Magalhaes
Joseph Magalhaes

How do you remember all that’s going at the same time building this machine It’s crazy to think it’s built outside no lift In a driveway

Vor 5 Tage
CMFG
CMFG

The ugliest rice out destroyed classic..

Vor 5 Tage
BOB ROTHWELL
BOB ROTHWELL

no offense intended Hoons, but this guy needs to get on Leno's garage.

Vor 5 Tage
BOB ROTHWELL
BOB ROTHWELL

Nordschleife

Vor 5 Tage
Havaseet2
Havaseet2

Who else replayed the first 7 seconds of this video 3 or 4 times?

Vor 5 Tage
Scott Gregory
Scott Gregory

I believe him because I build Hyper Cars in a crawl space.

Vor 5 Tage
phyuck yiu
phyuck yiu

its junk its to low to drive on the street whats the point trailer queen

Vor 5 Tage
2K8Si
2K8Si

Wow... wow... WOW. I can't begin to understand how proud someone must feel to create something as completely awesome as this... I simply can not give enough props. This is a masterpiece.

Vor 5 Tage
Aaron Ball
Aaron Ball

Maybe only AutoX that BEAST or something similar to help preserve it.

Vor 5 Tage
nezerac
nezerac

I'm trying not to be a hater here. Because this guy can fab like a no other. It's definitely unique, it's different....but it's not a pontiac anymore....It's a basically a monster with some poor 1970 pontiac firebird's face on it. I mean kudos for the vision, the fucking quality is insane, I LOVE THE FACT HE PAINTED IT WHITE!! A little bit of inside baseball here car builders who have LESS TALENT will avoid white like THE PLAGUE!! If your panel work is shotty...white will make it look ten times worse. But again. I feel like he made something cool but he killed the car doing it. I feel like an artisan would change what's there and make it better rather than just cut it all out and put the best everything in it's place. It's still gotta be a car and I feel like this is all machine.

Vor 5 Tage
Terrence Lynch
Terrence Lynch

I bought a 1972 formula 400 hundred Firebird from my platoon sergeant when I was stationed at Camp Pendleton brought it back home to Rhode Island what a sweet ride you did a beautiful job on Your Car

Vor 6 Tage
David DeChambeau
David DeChambeau

Very cool mechanically but the ghetto stanse and the fender flares make it embarrasing.

Vor 6 Tage
vertigo91na
vertigo91na

Jaw dropped... the whole video

Vor 6 Tage
LJaysPerspective
LJaysPerspective

This is an amazing build for a young man to build. Even though he built this next to his parants house. He must have had a significant amount of funds even if you can do some work your self its a significant. I had at 10 970 Buick Regal and i did a complete engine and trans replacement infact i put a SBC 305 into a Buick so ofcourse i had to change the engine mounts. This was not rocket science but it did require some funds and lots of effort...this Pontiac is beautiful and simplistic in appearance yet its of sophisticated at heart, no matter how many hands were involved it was beautifully executed. Thx for sharing job well done👍

Vor 6 Tage
Asif Lohar
Asif Lohar

Why must the internet lie so much! Yes he did bulid this outside his parents mansion who has state of the art tools along with an endless check book from his trust fund! The real hero is the guy who works his ass off and builds it with a budget.

Vor 6 Tage
crazyjr
crazyjr

with the offset of those wheels, you can bet the wheel bearings take a huge beating. There is no way this is a daily driver, especially with the camber on the front

Vor 6 Tage
Leon H
Leon H

Other than a few body panels there is no Trans Am left, I never understand how someone can call a car totally custom built car or truck the same as a bit of sheet metal. That being said this guy has some serious talent, this is an awesome car that resembles a 70's Firebird.

Vor 6 Tage
busa pilot
busa pilot

That exhaust should forever be called "The Cthulhu" because it is not of this world, and you may lose your mind trying to create it.

Vor 6 Tage
StreetArtillery
StreetArtillery

Was never into slammed cars and front wheels that look like they took a fall from being hoisted with a hot air balloon. VW beetles do that stuff too

Vor 6 Tage
Glen Calhoun
Glen Calhoun

I wish I could love this vid a thousand times!!! This is the apitomy of beast mode!!! Hell of a ride bro!!!

Vor 6 Tage
EpicWarDog
EpicWarDog

Amazing!!!

Vor 6 Tage
EpicWarDog
EpicWarDog

I'm speechless

Vor 6 Tage
ClassicRockProd
ClassicRockProd

I can see chopping up a 1973 Trans Am, but not a 1970. All original that car would have been worth a fortune.

Vor 6 Tage
Fart Smucker
Fart Smucker

1:10 that looks like absolute shit. Its not a trans am, period.

Vor 6 Tage
B
B

This is nuts man ,dude looks like a hard worker !!!

Vor 6 Tage
B
B

just blast the palm springs...

Vor 6 Tage
larry fonseca
larry fonseca

Awesome job

Vor 6 Tage
PRETERIST LAB - END TIMES
PRETERIST LAB - END TIMES

All this was done by you? "Uh huh." You did an amazing job of the plumbing! "Thanks." You really made a work of art man! "I very much appreciate that." Its amazing man! "I appreciate you guys for having me." I dunno what's more impressive - the car or Riley's understatement. Respect for your work of art RILEY STAIR - the BEST business card. HE is the MAN guys. Australia.

Vor 6 Tage
pandas231
pandas231

Sorry but this car is strictly for for freak show gawking. It looks ridiculous once you really get into the whole build. Sits way too low and you can see the scrape marks on the tires from the flares. I love these old Firebirds when they sit on a decent stance. Oh and check out the 'Trans Am' series show for how a real Trans Am should be....certainly not like this oddity.

Vor 6 Tage
Sketchy
Sketchy

I suggest one more inch of ride height.

Vor 6 Tage
怒りFlockahashi
怒りFlockahashi

I wish I was 1/8 as smart as he is mechanically.

Vor 6 Tage
Kyle Kashuda
Kyle Kashuda

Dude looks like he is 25 years old. I love cars of all sorts and am 34 and don’t have all the knowledge in my brain that he has in his pinky. Where do you learn so much? Also “side yard” must be a stretch, you don’t build a masterpiece like this in a dirt side yard.

Vor 6 Tage
Jerzey Boy1995
Jerzey Boy1995

An all white Pontiac that's not Big Chiefs Crow?

Vor 6 Tage
ProbablyAFK
ProbablyAFK

The stance is hideous. Wayyy too much camber :(

Vor 6 Tage
Rick Davidson
Rick Davidson

I can hear the scraping from here...

Vor 7 Tage
David Dematos
David Dematos

Love the car men .good job

Vor 7 Tage
Pandacat 666
Pandacat 666

KITT is the most greatest trans am ever build, PERIOD! you gotta stop this blasphemy guys... :D thats madness!

Vor 7 Tage
ckelley63
ckelley63

No thanks

Vor 7 Tage
Rod Wargo
Rod Wargo

wow this young guy has some impressive skills wow, wow ,wow awesome car man , however the formula 455 h.o done factory is in my opinion one of the coolest musclecars out there , dont know if i would be able to cut into it if i owned one , very nice

Vor 7 Tage
Ed
Ed

Who thumbed down this video!!!!??? I feel like kicking them in their teeth. Ugh. Oof.

Vor 7 Tage
Todd Simone
Todd Simone

How the hell this thing doesn't overheat with the radiator parallel to the ground

Vor 7 Tage
Canadian KRISPY Bacon
Canadian KRISPY Bacon

Brings ‘cable management ‘ to some next lvl shit!

Vor 7 Tage
Sanford Graham
Sanford Graham

Love it !

Vor 7 Tage
Tips 4 truckers
Tips 4 truckers

This dude seems like the nicest guy

Vor 7 Tage
Richard Johnson
Richard Johnson

Interior looks like crap.

Vor 7 Tage
j c
j c

cool

Vor 7 Tage
Arlenbuilt
Arlenbuilt

And in come the "Youtube Certified" Mechanics and Fabricators.

Vor 7 Tage
russell379x
russell379x

awesome car man

Vor 7 Tage
Mr.Salty’s Reef Tank
Mr.Salty’s Reef Tank

The braided hoses ruin it for me, could at least spend a day neatening it up. Amazing other than that Edit- there is a braided hose running through one of the wishbones, that is just dangerous let alone messy and not very well thought out!

Vor 7 Tage
The motorsports project
The motorsports project

I think I'll go watch B is for build now and see what kind of fuckery he's putting plastic over fenders on this week lol

Vor 7 Tage
Fun freq
Fun freq

I wish I could do stuff like that! That engine is one angry monster.

Vor 7 Tage
09F430_19Grndsprt_09s/cViper_17stg3ecobst_imbroke
09F430_19Grndsprt_09s/cViper_17stg3ecobst_imbroke

Oh my gawd this is boderline harcode porn because I got an erection

Vor 7 Tage
sir crash`alot fpv
sir crash`alot fpv

He's a genius. great car and great build.

Vor 7 Tage
ihateliberals
ihateliberals

p.s. you should've tubbed it, both front and rear. that way you wouldn't need those big fender flares. and it would've looked so much better

Vor 7 Tage
Cindy S
Cindy S

The top needs to be chopped like 3-7" just take the edge off the height. The rear spoiler and tail light area needs to be raised perhaps 6+ inches. And as far as the engine; well 700 HP is chicken feed today. To be credible, this car needs 1200 up to 2000 HP. The construction quality and design otherwise this is really outstanding for a home built(!) effort.

Vor 7 Tage
ihateliberals
ihateliberals

i'm not really a fan of trans-am/formulas, but this one looks damn good! normally i like white cars when done properly. but i think this particular car would've looked better another color. like a cobalt blue for example. that way the front spoiler and fender flares wouldn't stick out so much. plus it'd make it look like it sets lower. i love the spaghetti header! that's how a header should look. although i didn't like how it went ahead of the engine, but i could live with it. one thing i didnt see that i would like is, some custom ram air. i love the suspension. this guy did a hell f a nice job on this car. i'd like to see some organization of all those oil lines though, so it doesn't look so cluttered

Vor 7 Tage
Harpo Marx
Harpo Marx

"7 FEET wide"

Vor 7 Tage
InBoostWeTrust
InBoostWeTrust

At the mean time ROB cant finish his 4 rotor

Vor 7 Tage

Nächstes Video

Megan Purvis | Z Nation | Кино - Дискография [38CD] (1982-2018) WAV